Paint & Coating
Amines
Ethylene Diamine (EDA)
Properties :
| Chemical formula | C2H8N2 |
|---|---|
| Molar mass | 60.100 g·mol |
| Appearance | Colorless liquid |
| Odor | Ammoniacal |
| Density | 0.90 g/cm |
| Melting point | 8 °C (46 °F; 281 K) |
| Boiling point | 116 °C (241 °F; 389 K) |
| Flash Point | 91°F |
| Solubility in water | miscible |
| Vapor pressure | 1.3 kPa (at 20 °C) |
Applications :
Ethylenediamine is an organic compound. This colorless liquid with an ammonia-like odor is a strongly basic amine. It is a common organic additive to the plant in vitro culture murashige and skoog medium
Diethylene Triamine (DETA)
Properties :
| Physical state and appearance | Liquid. (clear viscous liquid.) |
|---|---|
| Solubility | Partially soluble in cold water, hot water |
| Melting Point | -39°C (-38.2°F) |
| Boiling Point | 207.1°C (404.8°F) |
| Specific Gravity | 0.96 (Water = 1) |
| Odor | Ammoniacal(Slight) |
| Molecular weight | 103.17 g/mole |
Applications :
Diethylene Triamine is used as an intermediate for organic synthesis and saponification agent for acidic materials. It is used as a solvent for sulfur, acidic gas, resin and as a fuel and oil field component
Trithylene Tetramine (TETA)
Properties :
| Appearance | Colorless liquid |
|---|---|
| Solubility in water | Miscible |
| Melting Point | −34.6 °C; −30.4 °F; 238.5 K |
| Boiling Point | 266.6 °C; 511.8 °F; 539.7 K |
| Molar mass | 146.24 g·mol−1 |
| Odor | Fishy, ammoniacal |
| Vapor pressure | < 1 Pa (at 20 °C) |
Applications :
Triethylenetetramine is an organic compound. It is used as a reagent in organic synthesis and is a less hazardous substitute for phosgene for a variety of chemical transformations.
Tetraethylene Pentamine (TEPA)
Properties :
| Physical state and Appearance | Clear, yellow, viscous liquid |
|---|---|
| Solubility | Soluble in cold water, hot water |
| Melting Point | -30°C (-22°F) |
| Boiling Point | 340.3°C (644.5°F) |
| Specific Gravity | 0.998 (Water = 1) |
| Odor | Ammoniacal, Disagreeable, Penetrating |
Applications :
TEPA is a highly reactive chemical used as a building block to produce a wide variety of products. It is used to produce oil production chemicals for corrosion inhibitors, demulsifiers, and neutralizers as well as functional additives that enhance certain separation techniques.
Isophorone Diamine (IPDA)
Properties :
| Chemical formula | C10H22N2 |
|---|---|
| Molar mass | 170.300 g·mol |
| Appearance | Colourless liquid |
| Density | 0.922 |
| Melting point | 10 °C (50 °F; 283 K) |
| Boiling point | 247 °C (477 °F; 520 K) |
| Flash Point | 117 °C |
| Solubility in water | Very good |
| Vapor pressure | 0.02 mmHg |
Acrylate Monomers
Butyl Acrylate
Properties :
| Appearance | Clear liquid |
|---|---|
| Solubility | Slightly soluble |
| Color | Clear Colorless |
| Boiling Point | 147.4°C |
| Specific Gravity | 0.9015 (Water = 1) |
| Vapor Density | 4mmHG(20°C) |
| Flash point | 39°C |
Applications :
Butyl acrylate is used in paints, sealants, coatings, adhesives, fuel, textiles, plastics, and caulk.
2 - Ethy Hexyl Acrylate
Properties :
| Physical state and appearance | Colourless liquid |
|---|---|
| Molecular Weight | 184.28 |
| Odor | Sweet odour. |
| Boiling Point | 213.5°c |
| Specific Gravity | 0.885 @ 20°c |
| Vapor Density | 7.67 kg/m3 |
| Flash point | 85°c |
Applications :
2 - Ethy Hexyl Acrylate is used in the production of co-polymers for example acrylic acid and its salts, esters, amides,methacrylates, acrylonitrile, maleates, vinyl acetate and vinyl chloride.
Ethyl Acrylate
Properties :
| Physical state and appearance | Liquid |
|---|---|
| Molecular Weight | 100.12 g/mole |
| Odor | Penetrating Lachrymator (Strong) |
| Boiling Point | 99.4°C (210.9°F) |
| Melting Point | -72°C (-97.6°F) |
| Vapor Density | 3.45 (Air = 1) |
| Flash point | -2°C |
Applications :
Ethyl acrylate is an organic compound. It is used in the production of polymers including resins, plastics, rubber, and denture material. It is mainly produced for paints, textiles, and non-woven fibers.
Methyl Acrylate
Properties :
| Physical state and appearance | Liquid |
|---|---|
| Molecular Weight | 86.09 g/mole |
| Odor | Acrid |
| Boiling Point | 80.5°C (176.9°F) |
| Melting Point | -76.5°C (-105.7°F) |
| Vapor Density | 2.97 (Air = 1) |
| Specific Gravity | 0.9561 (Water = 1) |
Applications :
Methyl acrylate is an organic compound. It is a colourless liquid with a characteristic acrid odor. It is mainly produced to make acrylate fiber, which is used to weave synthetic carpets.
Acrylic Acid
Properties :
| Physical state and appearance | Liquid |
|---|---|
| Molecular Weight | 72.06 g/mole |
| Odor | Acrid (Strong.) |
| Boiling Point | 141°C (285.8°F) |
| Melting Point | 14°C (57.2°F) |
| Vapor Pressure | 0.5 kPa (@ 20°C) |
| Solubility | Soluble in cold water. Very slightly soluble in acetone. Insoluble in diethyl ether. |
Acrylic acid is an organic compound. It is used in the field of application of plastics, paper manufacture and coating, exterior house paints for wood and masonry, coatings for compressed board and related building materials.
N - Metha Acrylic Acid
N - Butyl Metha Acrylate
Properties :
| Physical state and Appearance | Liquid |
|---|---|
| Boiling Point | 160°C (320°F) |
| Melting Point | -75°C (-103°F) |
| Vapor Pressure | 0.7 kPa (@ 20°C) |
| Specific Gravity | 0.8936 (Water = 1) |
| Odor | Characteristic odor of esters(Slight) |
| Color | Colorless |
N-Butyl Metha Acrylate is a clear colorless liquid. It is used in making cleaning products, antioxidant agents, amphoteric surfactants.
Hydroxy Ethyl Metha Acrylate
Properties :
| Appearance | Colourless liquid |
|---|---|
| Boiling point | 213 °C (415 °F; 486 K)[1] |
| Melting point | −99 °C (−146 °F; 174 K)[1] |
| Density | 1.07 g/cm3 |
Hydroxyethyl Methacrylate is used in light curing polymer system and high performance coatings for lasting high gloss against cratching, solvents and weathering.
Polyester Resin Raw materials
Isopthalic Acid
TGIC
NGP
Propylene Glycol
MEKP
Aliphatic Isocyanates
HDI
HMDI
Properties :
| Chemical formula | C8H12N2O2 |
|---|---|
| Molar mass | 168.2 g/mol |
| Appearance | Colourless liquid |
| Density | 1.047 g/cm3, liquid |
| Melting point | −67 °C (−89 °F; 206 K) |
| Boiling point | 255 °C (491 °F; 528 K) |
| Odor | sharp, pungent |
| Viscosity | 3 cP at 25 °C |
| Vapor pressure | 0.05 mmHg (25 °C) |
HT - Series HT - 100/ 90BS
HB Series HB - 100 / 75B / 75X
IPDI
Speciality Amines
Wanamine IPDI Series
Wanamine MDA Series
Wanamine HMDA Series
Our Clients
